pic32
This is an old revision of the document!
Table of Contents
PIC32
- the pic32 programming connector (labeled PIC32) matches the PICkit pinout exactly - readback protection is off :) firmware can be trivially extracted.
iMX to PIC comms
Watchdog initialization and feeding: kibble.sal
Stopping the watchdog (with NxExe watchdog 0): euthasol.sal
Stopping is as simple as
echo -ne "\xBC\x01\0\x04\0\x04H@\x03\0\0" > /dev/ttymxc2
Communication uses the same IPP protocol as cVEND.
IPP message types
| msgType | dir | name | description |
|---|---|---|---|
| 0x02 | → | ValueRead | accepts a 2-byte key, returns a variable-length value |
| 0x03 | ← | ValueReadReply | |
| 0x04 | → | ValueWrite | accepts a 2-byte key followed by a variable-length value, assigns value to key |
| 0x05 | ← | ValueWriteReply |
→ - iMX to PIC
← - PIC to iMX
Keys
| id | type | description |
|---|---|---|
| 003b | u8 | ignition state (0/1) |
| 4003 | u16 | watchdog timeout (seconds), 0 to disable |
| 500b | u16 | ambient light sensor |
| 5040 | u16 | input voltage (mV) |
| c000 | string | pic32 version |
| c001 | string | bootloader version |
pic32.1772577324.txt.gz · Last modified: by doof